From Time To Time There Can Be A Number Of Problems Which Crop Up When Using Your Canon Printer. For That Reason, We Have Compiled Information And Solutions To Error Codes Relating To Your Canon Device.

1. CANON PRINTER ERROR CODE E13

SOLUTION - You Might Not Have Ink In Your Printer Ink Cartridges. It's Time To Replace The Cartridges With Some Compatible Consumables.

2. CANON PRINTER ERROR CODE E16

SOLUTION - Your Ink Cartridges Are Empty. Replace Your Ink Cartridges And Close The Paper Output Cover.

3. CANON PRINTER ERROR CODE U162

SOLUTION - Your Printer Is Prompting You To Replace Empty Cartridges. In Case You Get The Same Message After Inserting A New Ink Cartridge, You Can Remove This Error Code By Carrying Out The Following Instruction. On Your Canon Printer, Press And Hold Down The Stop/Reset/Resume Button For 10 Seconds. This Lets The Printer Know You Are Aware Of The Message But Wish To Continue Printing Anyway.

4. CANON PRINTER ERROR CODE U163

SOLUTION - Your Printer Is Prompting You To Replace Empty Cartridges. In Case You Get The Same Message After Inserting A New Ink Cartridge, You Can Remove This Error Code By Carrying Out The Following Instruction. On Your Canon Printer, Press And Hold Down The Stop/Reset/Resume Button For 10 Seconds. This Lets The Printer Know You Are Aware Of The Message But Wish To Continue Printing Anyway.

5. CANON PRINTER ERROR CODE 1686

SOLUTION - The Ink In Your Cartridges Has Run Out. Replace The Empty Ink Cartridges.

6. CANON PRINTER ERROR CODE E04

SOLUTION - It Seems You Had Not Installed The Cartridges Properly. Remove The Cartridge Section. Once The Cartridges Have Been Removed You Can Re-Install Them By Pushing Them In Until It Clicks Into Place.

7. CANON PRINTER ERROR CODE E14

SOLUTION - An Orange Light May Blink 14 Times When This Error Code Appears. The Code Indicates That Your Ink Cartridges Are Not Being Supported By The Printer & This May Be As A Result Of The Ink Tank Being Sold In A Different Area To Where The Machine Was Originally Bought.

8. CANON PRINTER ERROR CODE B200

SOLUTION - This Error Code Occur Due To A Hardware Failure With Either The Printer Or The Print Head. In This Case, Turn Off The Printer, Disconnect The Power Cable, Open The Printer Cover, Check For Any Orange Protective Tape Or White Polystyrene And Remove If Necessary, Remove Any Paper Pieces Or Any Foreign Objects From The Printer, Close The Cover, Reconnect And Turn On.

9. CANON PRINTER ERROR CODE 5100

SOLUTION - Turn Off The Printer Then Disconnect The Power Cable After That Open The Printer Cover Make Sure To Check For Any Orange Protective Tape Or Any White Polystyrene And Remove If Necessary, Remove All Foreign Objects In The Printer, Close The Cover, Reconnect And Turn On.

10. CANON PRINTER ERROR CODE 6000

SOLUTION - Turn Off The Printer Then Disconnect The Power Cable After That Open The Printer Cover Make Sure To Check For Any Orange Protective Tape Or Any White Polystyrene & Remove If Necessary, Remove All Foreign Objects In The Printer, Close The Cover, Reconnect And Turn On.

So Basically, These Are The Main Error Codes That A Canon Printer Go Through. Well, About Us, We Are A Technical Support Provider. We Offer Technical Services For Scanners, Laptops, And Printers & Networking Related Issues. Call Us Or Visit Our Official Website To Get The Best Online Canon Printer Technical Support Experience.